cleaning method of industrial dust vacuum filter accessories basic structure is composed of fan, box, ash bucket three parts. Each component is installed in a vertical dust removal frame, the structure is compact. It is important to choose the industrial dust removal equipment suitable for their own working conditions. Some customers may not understand it very well, thinking that as long as it is an industrial dust collector can be used in any working conditions. In fact, this idea is wrong. So how to choose the appropriate cleaning method of industrial dust vacuum filter? When choosing the cleaning method of industrial dust vacuum filter, it is necessary to have a detailed understanding of the working condition at first.

Choose the boiler cleaning method of industrial dust vacuum filter first to understand the nature of the working condition of dust, whether it is corrosive, how much is the better and lower temperature of dust and processing area, air volume and other parameters. Boiler cleaning method of industrial dust vacuum filter How to install: Boiler cleaning method of industrial dust vacuum filter The importance of installation quality This type of bag vacuum filter, Its installation quality is important to the stable operation of the boiler cleaning method of industrial dust vacuum filter. It is the installation of the injection system, the box body, the clean gas chamber and the flower plate. The installation precision is good and the sealing is good.

cleaning method of industrial dust vacuum filter accessories in the boiler cleaning method of industrial dust vacuum filter during the maintenance of the need to be more detailed, Only in this way can we maximize the maintenance of the boiler cleaning method of industrial dust vacuum filter itself. Dust accumulates on the inner surface of the filter bag and keeps increasing, so that the resistance of the dust collector keeps rising. When the resistance rises to about 1500pa, in order to make the dust collector continue to work, it is necessary to periodically remove the dust on the filter bag. When specifically cleaning the dust, the top fan should be closed at first and the shaking motor should be started. The dust removal filter bag is in the corrugated state, so that the dust falls off, the unloading is to be cleaned after the motor stop shaking, restart the fan, so that the dust collector starts to work again, the above action is automatically controlled by the controller.

1, check the plate warping due to excessive vibration or structural failure.

2. Check the insulator inside the dust collector and clean its surface.

3, check whether the electric ash. If there is ash, clean up the electric field ash.

4, through observation or measurement to check the boiler cleaning method of industrial dust vacuum filter internal parts of the position and condition, record the position of line broken line, so as to unified processing.

5. Check the distance from the line to the board, especially if the line is aligned. Excessive local spark discharge and conductor damage may be caused by the line deviation of 6mm in the channel.

cleaning method of industrial dust vacuum filter https://www.kaisenfilter.com/Do-you-know-the-precautions-for-using-industrial-dust-vacuum.html